EN | 中文
ELKLAR-AR-OIL
All Natural product contains a highly-concentrated solution of live, strains of lyophilized (freeze-dried) Pseudomonas organisms that occur naturally in the earth’s ecosystem. These cultures are free of pathogens and there is no artificial mutation or genetic engineering involved.
Every strain of microbe used in the ELKLAR-AR-OIL consortium is listed as a non-controlled nonhazardous DSL approved microorganism for permitted use.
Each batch of ELKLAR-AR-OIL is manufactured under sterile conditions, and subjected to stringent quality control protocols before release for shipment is made available as a freeze-dried powder and hydrated on site for the highest possible microbial activity.
ELKLAR-AR-OIL organisms metabolize a wider-range of organic compounds than any other microbe.
Extracted and isolated from contaminated site samples, ELKLAR-AR-OIL microbes metabolize petroleum hydrocarbons, polyaromatic hydrocarbons, organic solvents, and semi-volatile hydrocarbons converting them into harmless by-products.
As ELKLAR-AR-OIL microbes utilize carbon chain molecules as a food source, any organic (carbon chain) contaminant is applicable for ELKLAR-AR-OIL remediation.
APPLICABLE CONTAMINANTS
ELKLAR-AR-OIL microbes can degrade a wide variety of LNAPL/DNAPL (Light/Dense Non Aqueous Phase Liquids) and dissolved phase contaminants in groundwater while also degrading sorbed contaminants in surrounding soils.
ELKLAR-AR-OIL microbes can be delivered into groundwate aquifers through various In Situ methods, including direct injection, or monitoring wells.
Combining ELKLAR-AR-OIL organisms with KhaiEL’s surfactant allows for greater penetration while also desorbing contaminants and increasing bioavailability for increased degradation.
GROUND
WATER
ELKLAR-AR-OIL microbes can be sprayed onto surface water or wetlands for immediate consumption of toxic organic contaminants.
Field tested in low pH environments ELKLAR-AR-OIL microbes are ideal for muskeg, peatland, bog, pond, and containment applications.
SURFACE WATER
ELKLAR-AR-OIL microbes can be delivered into contaminated soils through various In Situ and Ex Situ methods.
Direct injection, in situ soil mixing, soil processing machines, and bio piles are all effective ways of treating contaminated soils.
We recommend combining ELKLAR-AR-OIL microbes with KhaiEL’s surfactant for optimum results.
SOILS
APPLICATION TYPES
RECOMMENDED SAMPLING INTERVALS
Monitoring and sampling should be assessed on a per site basis but typical sampling intervals for water applications are 15,30 and 45 days after treatment, and 30,60 and 90 days for soil applications.
